Other Parts Discussed in Thread: SYSCONFIG
Hello,
Linked FAQ is good to merge sensor controller studio, but I want to know that how to manage peripheral pins which define in syscfg with sensor controller studio?
Thanks,
Dinkar
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Dinkar,
Thank you for your message.
Generally speaking, SysConfig does not allow to configure the pins used by the Sensor Controller. Unless the main processor and the Sensor Controller share a pin - we do have an example showcasing this - I would recommend to make sure to avoid to allocate the pins used by the Sensor Controller using SysConfig.
I understand this approach is not the most practical. I'll take your remark to make sure we improve our tools.
Best regards,