BT-MSPAUDSOURCE: Need the original firmware

Hi Jocob,

I got the reply from customer:
Thank you for the response. When I am trying to build the given software it is showing an error " program make not found in path "

Kindly check and help. Thanks.

Hey Chong,

For the A3DPDemo_SRC project only IAR is supported. Is the IAR IDE available to the customer?

Thanks,
Jacob

Hi Jocob,

I got the reply from customer:
Still I am unable to build. Using IAR, it is showing the following errors attached


Kindly check and help. Thanks.

What compiler are they using? 

BR,
Jacob

Hi Jocob,

I made confirmation with the customer twice. They were repeating that they used the default settings and wanted to know what they have to change.

Please let me know if this information is not the answer to the compiler. Thanks.

Hey Chong,

I think the issue is that the customer is using the wrong compiler. Unfortunately, I am not aware of the specific compiler needed for this demo. 

Do these documents help the customer?

Readme.pdfReleaseNotes.pdf

Which version of the MSP430 are they using?

Best,
Jacob

Hi Jocob,

The customer replied with the part number: MSP430F5229.
Please let me know if version information is not included, or any further information is necessary.

Hi Chong,

Can you have the customer provide the library include paths? I think they are not linking the Bluetopia library nor the MSP430 SDK.

Best,

Jacob

Hi Jocob,

I got the reply from customer:
Attached the image as asked.

Now we are able to program but nothing is working. No LEDs blinking on the board.
Kindly check and help. Thanks.

Hi Chong,

What changes were made to get the program to compile? Can you have the customer debug and ensure that the program is reaching the InitializeApplication API? 

Thanks,
Jacob

Hi Jocob,

I got the reply from customer:
we didn't make any changes. after adding all we are able to compile it
but no response from the board

Kindly check and help. Thanks.

Hi Chong,

Can you ask the customer where the program halts? They can find this by running the demo within IAR and taking a screenshot of the application.

Best,
Jacob