LAUNCHXL-CC2650: I want to tune the bps of CC2650 LaunchPad.

Hiramatsu Tatsuki

Prodigy 110 points

Part Number: LAUNCHXL-CC2650
Other Parts Discussed in Thread: CC2650

Hello

I am trying to make a program on CC2650 LaunchPad.

Then I want to transmit and receive by 1Mbps.

Can I use CC2650 LaunchPad by 1Mbps?

And I want to tune the bps.

Please...

Tatsuki

over 3 years ago

0 Clément over 3 years ago

TI__Guru** 101450 points

Hi Tatsuki,

The PHY used by default for the Bluetooth Low Energy protocol is 1Mbps. As a consequence I recommend you leverage the simple_peripheral example and implement Bluetooth LE communication.

I hope this will help,

Best regards,

0 Hiramatsu Tatsuki over 3 years ago in reply to Clément

Prodigy 110 points

Hello Clement,

Thanks for the reply!

I don't use the default (BLE), but only tune the bps in my program.

I want to transimit and receive by GFSK, 2.4GHz, 1Mbps.

Any parameters related to the bps?

Please...

Tatsuki

0 Clément over 3 years ago in reply to Hiramatsu Tatsuki

TI__Guru** 101450 points

Hi,

Please leverage https://www.ti.com/tool/SMARTRFTM-STUDIO

Best regards,

Bluetooth®︎

Bluetooth forum

LAUNCHXL-CC2650: I want to tune the bps of CC2650 LaunchPad.