CC2642R-Q1: CC2642R-Q1

linqian wang

Intellectual 335 points

Part Number: CC2642R-Q1

CC2642R-Q1做二次开发，利用串口2与MCU通信

1、是否支持在私有串口协议的基础上支持原先的AT指令；

2、CC2642R-Q1支持的AT指令有哪些，可以在哪里查询到；

over 3 years ago

0 Clément over 3 years ago

TI__Guru** 101570 points

Hi,

This part of the forum is for English only.

May I kindly ask you to either translate your message, or post on https://e2echina.ti.com/

Thank you for your comprehension,

Best regards,

0 linqian wang over 3 years ago in reply to Clément

Intellectual 335 points

CC2642R-Q1 does secondary development and uses serial port 2 to communicate with MCU

1. Whether to support the original AT command based on the private serial port protocol;

2. What are the AT commands supported by CC2642R-Q1? Where can I find them?

+1 Clément over 3 years ago in reply to linqian wang

TI__Guru** 101570 points

Hi,

We do not have any code example for the CC2642R-Q1 to handle AT commands.

The CC2642R-Q1 has two UART interfaces that can be used to send/receive commands, however, you'll have to implement on your own the set of commands you need.

Best regards,

Bluetooth®︎

Bluetooth forum

CC2642R-Q1: CC2642R-Q1