CC2642R-Q1: Broadcast protocol

linqian wang

Intellectual 335 points

Part Number: CC2642R-Q1

IDE：CCS Version: 12.0.0.00009

SDK：simplelink_cc13xx_cc26xx_sdk_6_20_00_29

address：simplelink_cc13xx_cc26xx_sdk_6_20_00_29\examples\rtos\CC26X2R1_LAUNCHXL\ble5stack

Is there the latest protocol parsing documentation for advisting and scan_rsp?

over 3 years ago

0 linqian wang over 3 years ago

Intellectual 335 points

Part Number: CC2642R-Q1

IDE：CCS Version: 12.0.0.00009

SDK：simplelink_cc13xx_cc26xx_sdk_6_20_00_29

address：simplelink_cc13xx_cc26xx_sdk_6_20_00_29\examples\rtos\CC26X2R1_LAUNCHXL\ble5stack

In the routine multi_role, I have enabled the scan function and can scan a lot of broadcast data, so how do I know the name of each broadcast?

0 Christin Lee over 3 years ago in reply to linqian wang

TI__Guru 57485 points

Hi,

This is covered in our simplelink academy training section.

https://dev.ti.com/tirex/content/simplelink_academy_cc13xx_cc26xxsdk_6_40_00_00/modules/ble5stack/ble_scan_adv_basic/ble_scan_adv_basic.html#scanning-task-2-ndash-print-scanning-results

Please spend some time on this lab it will guide you to use our software.

0 linqian wang over 3 years ago in reply to Christin Lee

Intellectual 335 points

As shown in the following figure, I can obtain the device name from SCAN_RSP, but the SCAN_RSP information of each device is different. How should I parse it correctly?

0 Christin Lee over 3 years ago in reply to linqian wang

TI__Guru 57485 points

To understand the meaning of the scan response, you will need to see how the advertiser's scanrsp is composed. You should only parse the data you are interested in. I am not sure what your purpose is here, can you elaborate?

Also please do not make create new thread on the same topic.

Bluetooth®︎

Bluetooth forum

CC2642R-Q1: Broadcast protocol