CC1352P: CC135P Observer setting to capture maximum ble packets

Titus o'Neil

Part Number: CC1352P

Hi ,

Anyone recommend Settings for below case:

My Observer has to capture all BLE packets (or nearly maximum as possible). My Advertiser configured for advertisement packets sends every 100ms.

Recommend Parameters to change which I configured in Observer

Scan interval = 5

Scan window = 5

Scan duration = 60

Thanks,

0 Arthur R☑️ over 3 years ago

Dear Titus,

Your scan window has to be "Advertisement Interval + 10 mS", so that you do not miss any packet.

Regards.

Arthur

0 Titus o'Neil over 3 years ago in reply to Arthur R☑️

Thanks Arthur,

Case:

Advertisement sends every 1000ms

As you mentioned Scan windows as Adv +10 .so I defined my scan duration as 1010ms

What value should be on Scan Interval,Scan Duration for above case?

0 Titus o'Neil over 3 years ago in reply to Arthur R☑️

Hi,

Any Suggestion

Bluetooth forum