• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 51 subscribers
  • Views 178 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2652R7: Use as a netwrk processor in Observer role

Piyush Saxena45
Intellectual 430 points

Part Number: CC2652R7

Hello Ti Team,

I am designing a device in which i am using cc2652r7. I wan to use it as a network processor in Observer Role. I tried to check the Host Test example given in simplelink SDK but i am not able to understand

1) How to configure it to observer role. 

2) How to test it using Btool.

I request you to kindly share some information on this. 

Thanks in advance!

Regards,

Vidula

  • 0
    TI__Expert 5150 points

    Hi Vidula,

    Thank you for reaching out of us,

    1) To configure the host test example in observer mode you can also use btool with the GAP_DeviceInit command, make sure to reset the device to apply the change.

    2) You should find a user guide on btool in your sdk : ti/simplelink_cc13xx_cc26xx_sdk_X_XX_XX_XX/docs/ble5stack/btool_user_guide/Btool_Users_Guide/index

    regards,