This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2564: HFP with HCI interface

Part Number: CC2564

Hi,

I used the CC2564 on an existing design. In this design, PCM/I2S pin on our CC2564 are not connected. 

For a new application (without hardware modification), we want to communicate with this chip on HFP/HSP audio profile. Is this possible thanks to HCI interface?

For information, we have a host interface with Linux embedded. 

Thanks you in advance, 

Best Regards,