• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 52 subscribers
  • Views 496 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LP-EM-CC2340R5: Programming a launchpad

Josel Go
Expert 6155 points
Part Number: LP-EM-CC2340R5
Other Parts Discussed in Thread: CC3200-LAUNCHXL

Hi Experts,

Good day.

Based on Option 2. on the document  LP-EM-CC2340R5 Quick Start Guide (ti.com)



The CC3200-LAUNCHXL has an onboard emulator. Is it compatible with LP-EM-CC2340R5?
May I know how to connect LP-EM-CC2340R5 to CC3200-LAUNCHXL? Since I think there is no 10 pins on CC3200-LAUNCHXL.
Would you please show me how to connect?

Please advise.

Regards,

Josel

  • +1
    TI__Guru**** 218327 points

    Hi Josel,

    The FTDI JTAG emulator on the CC3200-LAUNCHXL may not be compatible with the XDS110 requirements for the LP-EM-CC2340R5.  If you must use another LaunchPad then it should be a SimpleLink CC13XX/CC26XX version with the onboard XDS110 emulator.  See "Advanced use of the LaunchPad hardware" from the LaunchPad User Guide.

    Regards,
    Ryan