• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 51 subscribers
  • Views 293 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2652RB: How to debug if change Address mode fail on sysconfig

Aichi Chen
Expert 1580 points

Part Number: CC2652RB

Hi,

I port SPP profiles on simple peripherial example.

I want to use TI's primary BLE address to use a fix BLE address so I change this:

\

It works on original example.

But it didnt work on my side, the BLE address still change every time after reset.

Any idea how to debug it?

Thanks,

  • +1
    TI__Mastermind 44910 points

    Hi,

    Are you calling the GAP_DeviceInit() function with the Public Address address mode parameter? In the simple_peripheral example, this is done in line 613 through the use of the addrMode variable. You will need to do something similar in the ported example.

    Best Regards,

    Jan