• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 2 answers
  • Subscribers 52 subscribers
  • Views 226 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2642R: Request DTM hex file for CC2642R and CC2652R

chong wah
Prodigy 10 points
Part Number: CC2642R
Other Parts Discussed in Thread: LAUNCHXL-CC26X2R1, , CC2652R, CC2652PSIP

Hi,

Please help to provide Direct Test Mode(DTM) hex file for CC2642R1FRGZR chipset inside PCBA, in order to use HCI in EUT Communication Protocol with Anritsu MT8852B bluetooth test set equipment.

I will use launchxl-cc26x2r1 eval kit to do the mockup testing (ble chipset is CC2652R. Please provide DTM hex file for CC2652 also if different with CC2642R.

  • 0
    TI__Expert 4250 points

    Hi Chong,

    I am not sure if I this is 100% what you need. However, please have a look into our SDK.

    In the \examples\rtos\LP_CC2652PSIP\ble5stack\hexfiles folder, you will find the host_test_app. 

    This is able to react to HCI commands.

    Regards,

    Alex

  • 0
    Prodigy 10 points

    Hi Alex,

    i did not see the path hexfile mention in your replied below.  

    I only see these host_test_app.c, .h file inside path below,

    C:\ti\simplelink\ble_sdk_2_02_07_06\src\examples\host_test\cc26xx\app\

    But is not hex file.

    Could help advise?

  • 0 in reply to chong wah
    TI__Expert 4250 points

    Hi Chong,

    I would recommend you to update to the latest SDK from TI.com. 

    However, If you have the project files this should be ok, too. You can just build the required project using CCS 12.3 and flash it to your board afterwards.

    Regards,
    Alex