• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 51 subscribers
  • Views 230 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2640: signal by +5dbm

Alex Stilpans
Prodigy 140 points

Part Number: CC2640

Hi.

We use the function to boost the signal by +5dbm, for this we run the command:
HCI_EXT_SetTxPowerCmd(HCI_EXT_TX_POWER_5_DBM);

Is it necessary to enable this command somewhere else to work permanently at +5dbm?

  • 0
    TI__Mastermind 44800 points

    Hi,

    The HCI_EXT_SetTxPowerCmd() is the correct way to change the txPower for the device. You can run this function once at startup and the setting should be maintained throughout program execution.

    Best Regards,

    Jan