CC2652R: BLE mesh chat sample application

Ernest Yong

Expert 4680 points

Part Number: CC2652R
Other Parts Discussed in Thread: CC2592

Hi Team,

May I check on the enquiry below:

1. Do you have application note, guide, and sample application for Multiprotocol concurrent running BLE and Thread?

2. Do you have application note, guide, and sample application for BLE mesh remote provisioning?

3. Do you also have BLE mesh chat sample application?

Customer already have their own custom board, CC2652R1 + CC2592, and they've tested the Bluetooth peripheral application which runs well in long range.

over 1 year ago

0 Luke over 1 year ago

TI__Expert 3930 points

Hi Ernest,

Thanks for reaching out! We will look into this and get back to you as soon as possible. For now, could you clarify which projects the customer is using currently for the CC2652R1 + CC2592 as well as which version of the SDK these projects are from?

Thanks,

Luke

0 Clément over 1 year ago

TI__Guru** 101460 points

Hi,

Ernest Yong said:
1. Do you have application note, guide, and sample application for Multiprotocol concurrent running BLE and Thread?

We have DMM applications enabling Bluetooth LE + 15.4 or Bleutooth LE + Zigbee, but not Bluetooth LE + Thread.

In case you were asking, Multiprotocol when using Bluetooth Mesh won't be possible due to the air time consumption of Bluetooth Mesh applications.

Ernest Yong said:
2. Do you have application note, guide, and sample application for BLE mesh remote provisioning?

Bluetooth Mesh provisioning is discussed here: https://dev.ti.com/tirex/content/cc13xx_cc26xx_simplelink_academy_7_10_03_00/_build_cc13xx_cc26xx_simplelink_academy_7_10_03_00/source/blemesh/ble_mesh_provisioning/ble_mesh_provision.html

Ernest Yong said:
3. Do you also have BLE mesh chat sample application?

No, we don't. Also, I am not fully aware of what this type of application is. Would you happen to have some details or could you point me to the specifications?

Best regards,

0 Ernest Yong over 1 year ago in reply to Clément

TI__Expert 4680 points

Hi Clement,

In case you were asking, Multiprotocol when using Bluetooth Mesh won't be possible due to the air time consumption of Bluetooth Mesh applications.

==> Could you inform me which TI BLE Multiprotocol chip + PA/LNA FEM that support BLE + Thread that run concurrently?

==> Yes, BLE pheripheral only + Thread only, not BLE Mesh + Thread.

https://dev.ti.com/tirex/content/cc13xx_cc26xx_simplelink_academy_7_10_03_00/_build_cc13xx_cc26xx_simplelink_academy_7_10_03_00/source/blemesh/ble_mesh_provisioning/ble_mesh_provision.html

==> Sorry, I don't see BLE Mesh Remote provisioning at that link. "Remote provisioning (PB-remote) allows a provisioner to provision devices located outside of the provisioner's radio range. This is done by using Bluetooth mesh nodes to relay provisioning messages to a node within the range of the remote device that is to be provisioned."

No, we don't. Also, I am not fully aware of what this type of application is. Would you happen to have some details or could you point me to the specifications?

==> Bluetooth Mesh: Chat. The Bluetooth mesh chat sample demonstrates how to use the mesh network to facilitate communication between nodes by text, using the Chat Client model

Sorry, kindly see : Bluetooth Mesh: Chat — nRF Connect SDK 2.5.99 documentation (nordicsemi.com)

Please advise.

Best Regards,

Ernest

Bluetooth®︎

Bluetooth forum

CC2652R: BLE mesh chat sample application