CC2340R5: CC2340R5

Manjunatha GN

Prodigy 90 points

Part Number: CC2340R5

I need support on Task Creation, I briefly explain some application. We have 4 buttons (Button 1,2,3& 4)

1) press Button 01 Task 01 has to create (Red light on/off every 1 seconds)

2) Press Button 02 Task 01 has to disable (Red light off).

3) press Button 03 Task 02 has to create (Green light on/off every 0.5 seconds)

4) Press Button 04 Task 02 has to disable (Green light off).

I need your suggestion. How to create task

We are using Code Composer studio IDE with Free RTOS with CC2340R5 MCU.

Please share document for RTOS Task Creation.

Thanks & Regard,

Manjunatha G n

over 1 year ago

0 Clément over 1 year ago

TI__Guru** 101450 points

Hi Manjunatha,

Thank you for reaching out.

I would recommend to reference the following piece of documentation https://software-dl.ti.com/simplelink/esd/simplelink_lowpower_f3_sdk/7.40.00.64/exports/docs/ble5stack/ble_user_guide/html/ble-stack-5.x-guide/freertos-index-cc23xx.html

In addition, I recommend starting with the gpiointerrupt example (stored under <SDK>\examples\rtos\LP_EM_CC2340R5\drivers\gpiointerrupt). This example enables one task and should provide a behavior similar to what you expect for task 01. It also showcases the usage of buttons.

I hope this will help,

Best regards,

0 Manjunatha GN over 1 year ago in reply to Clément

Prodigy 90 points

I need only task has to be run, but i have option any task can be run.

Thanks

Manjunatha G N

0 Clément over 1 year ago in reply to Manjunatha GN

TI__Guru** 101450 points

Hello,

The docs I have pointed you to shows how to create and delete tasks. Please specifically refer to the code snippets here: https://software-dl.ti.com/simplelink/esd/simplelink_lowpower_f3_sdk/7.40.00.64/exports/docs/ble5stack/ble_user_guide/html/freertos/tasks.html#initializing-a-task

Regards,

Bluetooth®︎

Bluetooth forum

CC2340R5: CC2340R5