LP-EM-CC2340R5: can't build project for basic_ble_profiles

Hi Eric,
I didn’t manage to reproduce this error, you might have an issue in your project’s configuration. Could you check you have the following settings in Project properties > General > Products
• SimpleLink Low Power F3 SDK version is set to [7.40.0.64]
• SysConfig version is set to [1.18.1]

Please also check that:
• Line 52 of app_cgm.c is #include <ti/bleapp/profiles/continuous_glucose_monitoring/cgm_profile.h>
• The file cgm_profile.h is present at common/Profiles/continuous_glucose_monitoring/cgm_profile.h
If the all the above is correctly configured please try to re-import the project in a new workspace as described in the user's guide

Regards,

Hi Eric,

Looks like you have found the issue.

These files should not be empty. You can try to replace the files by the one present in the attached zip file. /cfs-file/__key/communityserver-discussions-components-files/538/continuous_5F00_glucose_5F00_monitoring.zip

I hope this will help,

Best regards,