• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 51 subscribers
  • Views 306 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

LP-EM-CC2340R5: RPA Update Interval

LP-EM-CC2340R5: What is the RPA Read Period in Sysconfig?

kei
Intellectual 635 points
Part Number: LP-EM-CC2340R5
Other Parts Discussed in Thread: SYSCONFIG

I'm using Sysconfig 1.18.1.

In the BLE settings, "RPA Read Period" is set and currently it is set to 3000ms.
What is this value used for?

There is no reference to the generated "READ_RPA_PERIOD", so I would like to know.
I couldn't find the relevant part in the manual either.

  • +1
    TI__Mastermind 42100 points

    Hi,

    Thank you for reaching out. The "RPA Read Period" option is currently not used in the Low Power F3 SDK. This was previously used in the F2 SDK to refresh the RP address printout in the UART menu, but it is not used at this time in the F3 SDK.

    Best Regards,

    Jan