CC2650: How to start with 2 cc2650lp to establish pairing in OOB mode

Shaw

Part Number: CC2650
Other Parts Discussed in Thread: CC2340R5, CC2674R10

Dear support,

I want to learn about out of band mode in ble pairing, as my project requires me to use 2 launchpads to extract ADC signals as keys to establish secure connection between them. And I wonder if I can get some suggestion about where I can start from. I also noticed secure_examples_central/ peripheral examples on github page of TI, but not with adequate document. I 'm curious about them and want to learn more.

Best Regards,

Shaw

over 1 year ago

0 Clément over 1 year ago

TI__Guru** 101460 points

Hi Shaw,

Thank you for reaching out.

Out Of Band pairing is described in https://www.ti.com/lit/swru393 in section §5.4.

I recommend to start your development out of a peripheral and a central example.

For enhanced security features, I recommend moving to newer generation devices such as the CC2340R5 or the CC2674R10.

I hope this will help,

Best regards,

Bluetooth®︎

Bluetooth forum

CC2650: How to start with 2 cc2650lp to establish pairing in OOB mode