CC2642R: adding OAD in multirole causing errors

Abinesh Rajendran

Part Number: CC2642R
Other Parts Discussed in Thread: SYSCONFIG

Continuing previous query ,I'm trying to integrate OAD ON-chip in multi role project.

https://e2e.ti.com/support/wireless-connectivity/bluetooth-group/bluetooth/f/bluetooth-forum/1354926/cc2642r-using-multi-role-after-connecting-scanning-is-slow/5171772#5171772

After adding all of those in multirole getting an error:#10099-D program will not fit into available memory, or the section contains a call site that requires a trampoline that can't be generated for this section. placement with alignment fails for section "GROUP_3" size 0x1f89e.

after adding this getting an error this file.

thanks and regards

chandra shekar

6 months ago

0 David 6 months ago

TI__Genius 11315 points

Hello Abinesh,

Thanks for reaching out. We will look into this thread and get back to you. May I ask if you are using the sam SDK version as in the previous thread?

How much space have you allocated for the heap size? You can see this inside Sysconfig - FreeRTOS - Stack and Heap sizing.

BR,

David.

0 Abinesh Rajendran 5 months ago in reply to David

Intellectual 270 points

Hi DAVID,

I'm using sdk 5.20 tool 11.1

created own application in that stacksize give as 1024

0 Ryan Brown1 5 months ago in reply to Abinesh Rajendran

TI__Guru**** 208047 points

Hi Abinesh,

David is currently on holiday and will be returning to answer forum posts on Tuesday, May 21st in the order and priority in which they were received. Thank you for your patience.

Regards,
Ryan

0 Tanguy Baltazart 5 months ago in reply to Ryan Brown1

TI__Intellectual 2880 points

Hi Abinesh,

I see you are using an old version of the SDK and following an old SLA, could you update your SDK version to use the release 7.40.00.77 and follow this SLA: BLE Enhanced OAD Advanced (ti.com) ?

Regards,

Tanguy

Bluetooth®︎

Bluetooth forum

CC2642R: adding OAD in multirole causing errors