• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 52 subscribers
  • Views 206 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2642R-Q1: CC2642R1TWFRTCRQ1

sakshi Mahajan
Prodigy 20 points
Part Number: CC2642R-Q1

Tool/software:

Hello team,

I am facing issue with CC2642R-Q1. I have flash a code initially but Q current we have observed was not as per requirement. we have reflash Controller ang again we have seen but current value came same as per previous. but again we have tried with another controller but same SW, we have observed Q current occurred as per requirement. 

I have tried to erase the code ang again reflash IC but the issue is still there.

can you suggest some test code for cross verification

thanks you

  • 0
    TI__Expert 6205 points

    Hello, 

    When mentioning Q current, are you implying Quiescent current? How are you measuring this current? 

    When you switch controllers, was this switching between two different custom hardware solutions, or switching between the CC242R1TWFRTCRQ1 unit? 

    Also, what SDK are you currently using, and are you flashing an example project? 

    Let me know!

    Thanks, 
    Isaac