CC2640R2F:eddystone UnModulation

규영 배

Part Number: CC2640R2F

Tool/software:

Hello, I have a question about Eddystone frequency.

The current design has been completed well, but the frequency needs to be changed to Un-modulated.

I would like to know reference materials or parts that need to be modified regarding frequency Un-modulation.


SDK : 5.30.00.03
project : eddystone

over 1 year ago

0 규영 배 over 1 year ago

Prodigy 180 points

Information on implementing unmodulated within the code is required, such as Smart Rf stdio.

0 Jake Pulliam over 1 year ago in reply to 규영 배

TI__Expert 6520 points

Hello,

I'm not clear on the use case. Is this for testing purposes? If so, then why isn't SmartRF sufficient? Otherwise my knowledge of Eddystone Beacons is limited but since it is a BLE format it would always be using a modulated signal.

Thanks,

Jake

0 규영 배 over 1 year ago in reply to Jake Pulliam

Prodigy 180 points

This function is for authenticating tests.

Is it impossible to modify this function within the code?

+1 Jake Pulliam over 1 year ago in reply to 규영 배

TI__Expert 6520 points

Hi,

If you need firmware that supports CW (unmodulated output) then you could use the host_test example from the SDK and use the HCI command for Modem Test.

Otherwise you can enable production or direct test mode. See https://software-dl.ti.com/simplelink/esd/simplelink_cc13xx_cc26xx_sdk/6.40.00.13/exports/docs/ble5stack/ble_user_guide/html/ble-stack-5.x/ptm-and-dtm.html which would be sufficient for line testing.

-Jake

Bluetooth®︎

Bluetooth forum

CC2640R2F:eddystone UnModulation