• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 52 subscribers
  • Views 196 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2340R2: HCI_ResetCmd() causes ICall_abort() trap

Lenio Cacula
Genius 16700 points
Part Number: CC2340R2

Tool/software:

After loading all HCI files into the project, my customer is getting errors after a call to HCI_ResetCmd() and the subsequent ICall_abort() trap. The return value for the call to iCall_waitMatch() is a timeout. Any thoughts on what could be causing this?

Thanks!