• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 51 subscribers
  • Views 239 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

Reference for CC26xx + johanson's 2450BM14G0011

CC2674R10: Balun from Johanson can be used for CC2674R10 or CC2674P10

Mike Wu1
Expert 2811 points
Part Number: CC2674R10
Other Parts Discussed in Thread: CC2674P10,

Tool/software:

Hi Team, 

Plesae help to check if 2450BM14G0011 Balun can be used for CC2674R10 / CC2674P10.

If OK, please also help to check if the SWRA572 can also be referenced for CC2674R10 / CC2674P10.

https://www.ti.com/lit/an/swra572/swra572.pdf

Thanks.

  • 0
    TI__Guru**** 171044 points

    Hi,

    The IPC (balun) mentioned in the SWRA572 is not suitable for the CC2674R10 and CC2674P10 parts.

    Note that IPC components are designed and matched to the radio of each device it supports, in order to get the performance specified in their datasheets.

    In the case of the CC2674P10, one IPC is used per RF path and this is also dependent on the maximum Tx output power desired (typically up to +10 dBm on the RF PA path).

    At the moment we do not have a suggestion for the CC2674x10 devices. I will report back to this thread if this situation changes. 

    Best regards,

    Rafael