Hello,
On page 18 of the document:
MSP430BT5190+CC2560
EtherMind Bluetooth SDK
Developer Guide
March 27, 2011
I found:
"
The PAN1315ETU is connected at the RF1 & RF2 headers of the MSP-EXP430F5438. To use the PAN1315ETU
with MSP-EXP430F5438, the following pins of RF3 needs to be shorted as shown below.
"
What follows is a picture showing the connections on the RF3 header and this end up with shorting the following pairs of IO ports:
P11.0 - P1.2
P9.4 - P1.5
P9.5 - P1.6
P8.1 - P1.3
1) What is the purpose of doing this?
2) Do I need to follow this in my application's final schematic?
Thank you for your attention!
Regards,
Joseph
