• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 51 subscribers
  • Views 186 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2340R5: Current consumption condition of Idle state.

Akihiko Fujinaka
Expert 3465 points
Part Number: CC2340R5

Tool/software:

Hello expert, 

Our customer have a question.

They found the idle current consumption in datasheet 7.9.

They would like to know the detail condition and how TI measure this value.

In particular, they think that idle current consumption depends greatly on CLKCTL register settings, so could you inform the CLKCTL register settings in detail for the idle current measurement?

Regards,

A.Fujinaka

  • 0
    TI__Guru**** 171044 points

    Fujinaka-san,

    The ICORE CLKCTL settings for the Idle measurement follow their reset values, except for the test conditions shown at the table (DMA and Flash on/off, Flash LDO off). Also, consider the Flash and SRAM are set to level 3 (maximum size).

    I don't see any other register of CLKCTL that could influence this measurement, but please let me know if there are any additional questions.

    Best regards,

    Rafael