• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 51 subscribers
  • Views 131 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LP-CC2652RB: Packet Sniffer 2 with LP-CC2652RB

Robert Weekly
Prodigy 60 points
Part Number: LP-CC2652RB

Tool/software:

Hi All,

I am trying to move from the old version TI Packet Sniffer onto new Packet Sniffer 2 with Wireshark.

Have purchase the LP-CC2652RB LaunchPad board to work as the sniffing device and configured all the plug in and wireshark as per:

Wireshark version 4.0.17

https://software-dl.ti.com/lprf/packet_sniffer_2/docs/user_guide/html/users_guide.html

Our target device is only advertising on 37.

No bonding / pairing.

I can seem to capture the connection and then get data on Wireshark but it doesn't seem to relate these packets (or interpret them) as BLE Protocol.

This what I currently get. Keep looking at setup reference guides but unsure what is going wrong. Should this work okay?

Many Thanks


Rob

  • 0
    TI__Expert 4200 points

    Hello Rob,

    Thanks for reaching out! Unfortunately, that is expected, as this is a limitation of the chip. For more in detail packet sniffing, you will need a more advanced packet sniffer.

    Best Regards,

    Tarek