• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 51 subscribers
  • Views 173 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2651R3: RESET_N High delay time

GR
Genius 3186 points
Part Number: CC2651R3


Tool/software:

Hello,

Is there any delay time between when RESET_N be high from Low voltage, and Reset?

And is this pin's character(high/Low drive voltage, hysteresis) same as GPIO? 

Thanks,

GR

  • +1
    TI__Expert 6740 points

    Technically, yes there is a delay, but we do not measure this data because the timing is completely overshadowed by the amount of time it takes to reach active mode that it is incorporated

    Same thing for high to low, the 1us of low duration needed to assert the reset_n pin overshadows the transition timing that it is incorporated.

  • 0 in reply to Bun Kuch
    Genius 3186 points

    Hi Kuch,

    Thanks for information.

    I understand.

    Best regards,

    GR