CC2745R10-Q1: Developing ANCS/AMS for Apple IOS

Mike Wu1

Expert 2841 points

Part Number: CC2745R10-Q1

Tool/software:

Hi Team,

My customer is going to port ANCS/AMS on CC2745.

They want to know if any apple certificaion or verification need to be tooked care after finishing functional test.

Please help to provide comments.

Thanks.

3 months ago

+1 Jan 3 months ago

TI__Mastermind 42200 points

Hi,

Thank you for reaching out. When developing accessories for Apple, you will need to ensure you abide by the Accessories Design Guidelines (Linked here: https://developer.apple.com/accessories/). Depending on the accessories you plan to implement, you may need to also MFI certification. To confirm, please reach out to your Apple representative.

Can you confirm what the end equipment use-case is?

Best Regards,

Jan

0 Mike Wu1 3 months ago in reply to Jan

Expert 2841 points

Hi,

My customer is considering to build BLE module w/ CAN interface for automotive.

+1 Jan 3 months ago in reply to Mike Wu1

TI__Mastermind 42200 points

Hi,

Understood. Thank you for confirming. As mentioned above, you should ensure you are following the design guidelines and reach out to Apple depending on the final accessory you are working on.

Best Regards,

Jan

0 Mike Wu1 3 months ago in reply to Jan

Expert 2841 points

Hi Jan,

Thanks for the comment. I will let my customer know and start to prepare.

Bluetooth®︎

Bluetooth forum

CC2745R10-Q1: Developing ANCS/AMS for Apple IOS