This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2755R10: Initial programing on Blank device

Part Number: CC2755R10
Other Parts Discussed in Thread: UNIFLASH, CC2340R5,

Tool/software:

Hello expert,

On the Blank device , does it require the SWD Interface to write the flash contents with Flash writing tool like Uniflash?

Or is it possible to use UART Interface to write to the Blank device?

Regards,

A.Fujinaka

  • Hello Fujinaka-san,

    I hope you are doing well. For initial programming of a blank CC2755R10 device we can make use of the serial bootloader which can use UART or SPI to program the device. So yes UART can be used to program the device, it would likely be similar to how the serial bootloader works in the CC2340R5.

    Thanks,
    Alex F