Connecting RF3 connectors on MSPEXP430F5438 and TiWiUB2 module

Anirban Bhowmick

Hello,

I also have bought a MSPEXP430F5438 experimenter board with TiWiUB2 module connected to it on RF1 ans RF2 connector.After installin SPPLE demo from Bluetopia i am facing the same problem on PuTTY terminal -

OpenStack().
BSC_Initialize Failed: -4.
Unable to open the stack.

i have checked the above link http://processors.wiki.ti.com/index.php/PAN1315EMK_User_Guide.But how to connect the respective pins on the RF3 connector.I dont have any RF3 adapter provided in the kit i purchased.Can u suggest me where can i get one.

Best Regards,

Anirban

over 12 years ago

0 Zahid Haq over 12 years ago

TI__Mastermind 25035 points

Hi Anirban,

The RF3 connector is included within the PAN1323 kit module: http://www.ti.com/tool/pan1323emk

You can just use jumpers to make the connections manually: http://processors.wiki.ti.com/index.php/PAN1315EMK_User_Guide#RF3_Connector

0 Anirban Bhowmick over 12 years ago in reply to Zahid Haq

Intellectual 390 points

Hi Zahid,

Thanks for your previous info.currently i dont have any extra jumpers for the TiWiUB2 module.Can you please suggest where can i get extra jumpers to make connections on the RF3 pins.

Bluetooth®︎

Bluetooth forum

Connecting RF3 connectors on MSPEXP430F5438 and TiWiUB2 module