BT and BTE

maurizio stefani

Prodigy 180 points

Other Parts Discussed in Thread: CC2564, CC2541

HI,

I would like to make a design that using the same HW can implement BT and BTLE. Is there someone that can help ,me?

Thank you

maurizio stefani

over 13 years ago

0 YiKai Chen over 13 years ago

Guru 735695 points

You can check cc2564 and its demo on http://processors.wiki.ti.com/index.php/CC256x_MSP430_Bluetopia_Basic_Demo_APPS#Classic_BT_.2B_BLE_Demos .

0 Giorgio Evangelista over 13 years ago in reply to YiKai Chen

Prodigy 10 points

Is there a way to do this with a System On Chip ?

0 kazola over 13 years ago in reply to Giorgio Evangelista

Guru 18625 points

Hi Giorgio,

CC2564 is a System-on-Chip.

You can order and develop your own board.

0 maurizio stefani over 13 years ago in reply to kazola

Prodigy 180 points

HI Kazola,

maurizio stefani that strts the discussion about this,

What I know is the capability to have a project with same HW but able to handle the two protocols (2.1/3 and 4.0) changing the FW only. Again we are searching for a PSOC solution (processor and radio integrated) in order to save money, space and battery.

thank you

maurizio stefani

0 kazola over 13 years ago in reply to maurizio stefani

Guru 18625 points

A so-called "dual mode" chip is what you want.

CC2541 has BLE and propietary and TI calls it "dual" but do not get confused.

A dual chip can handle both BT and BLE stacks simultaneoulsy. CC2564 is your choice.

Bluetooth®︎

Bluetooth forum

BT and BTE