Bluetooth®︎

Bluetooth forum

State Resolved
Locked Locked
Replies 7 replies
Subscribers 52 subscribers
Views 558 views
Users 0 members are here

Support feedback

Options

Options

Related

Guide to develope loader for Keyfob - CC2540 Mini Developement Kit

Ketan Gorania

Intellectual 255 points

Other Parts Discussed in Thread: CC2540

Hi

I have purchase CC2540 Mini Developement Kit

I am developing software in vb.net ,that load software to keyfob after profile is selected.

Now i have a few queries regarding these things

1.)How can i check if device(keyfob) is connected

2.)Do you have any example

Waiting for the kind reply.

Thankyou

over 12 years ago

0 Leo Bellotindos over 12 years ago

Intellectual 710 points

You could take a look at the C# sample code located at the following link.

http://processors.wiki.ti.com/index.php/Category:HealthDemo

If you are unfamiliar with C#, there are tools that can convert C# code to VB.net code.

0 Ketan Gorania over 12 years ago in reply to Leo Bellotindos

Intellectual 255 points

Hi Leo

Thankyou for your reply

Basically what i am looking is to install .hex file into Keyfob, after user selects the profile.

(Like SmartRF Flash Programmer does to load software)

Do you have any example?

Regards

Ketan

0 Leo Bellotindos over 12 years ago in reply to Ketan Gorania

Intellectual 710 points

Is over-air-download what you're looking for? Below are some links...

http://e2e.ti.com/support/low_power_rf/f/538/t/240214.aspx

http://processors.wiki.ti.com/index.php/OAD

http://processors.wiki.ti.com/images/8/82/OAD_for_CC254x.pdf

Additional BLE resources...

http://processors.wiki.ti.com/index.php/Category:BluetoothLE

0 Ketan Gorania over 12 years ago in reply to Leo Bellotindos

Intellectual 255 points

Hi

I am looking for flashing Keyfob with .hex file,using CC Debugger with cable

Same as SmartRF Flash Programmer does to load software

Regards

Ketan

0 Ketan Gorania over 12 years ago in reply to Ketan Gorania

Intellectual 255 points

Hi

Is there any DLLs and API that i can use to detect Keyfob (like it does in SmartRF Flash Programmer ) and Flash .hex file of a profile(say example GlucoseSensor that comes with BLEv1.3.2) into keyfob

Regards

Ketan

0 TIABO over 12 years ago in reply to Ketan Gorania

TI__Genius 12900 points

Hi,

Perhaps the command line version of the SmartRF Flash Programmer is what you are looking for?

You get it by downloading the SmartRF Flash Programmer (version 2 is only for Cortex-M3, so choose version 1).

Br,
ABO

0 Ketan Gorania over 12 years ago in reply to TIABO

Intellectual 255 points

Hi

Thankyou for your reply

yes, that i was looking for

Thankyou

Regards

Ketan