Getting CC2567 to work

Nikolas Simon

Other Parts Discussed in Thread: CC2567, CC2564

Hi,

I'm developing a sensor node where I try to integrate the CC2567 transceiver module (on PAN1323). As I've read HCI commands have to be used to configure the module and communicate with it. Unfortunately, I couldn't find the CC2567 Service Pack on the CC256x Download page. Does anyone know where I can find it? Or how to initialize and communicate with this module? Is there something like an HCI protocol I can get somewhere?

Thank you very much for any help.
Nikolas

over 11 years ago

0 Dotan Ziv over 11 years ago

TI__Expert 5840 points

Hi Nikolas,

The service pack can be found in CC256x wiki :

http://processors.wiki.ti.com/index.php/CC256x

http://processors.wiki.ti.com/index.php/CC256x_Downloads

Regards,

Dotan

0 Nikolas Simon over 11 years ago in reply to Dotan Ziv

Prodigy 60 points

Hi Dotan,

thank you, but there is no service pack for the CC2567 on the download website.

Where can I find the service pack for CC2567?

Regards,

Nikolas

0 Sundeep Javvaji over 11 years ago in reply to Nikolas Simon

TI__Mastermind 32615 points

Hi Nikolas,

CC2567 is no longer supported, For new designs we suggest using CC2564B instead. You can contact to contact SSO(sales@stonestreetone.com) to get the SW.

But It is worth giving a try with "CC2564 BT BLE SP BTS.zip" from the links provided in the previous post.

0 Nikolas Simon over 11 years ago in reply to Sundeep Javvaji

Prodigy 60 points

Thank you! Just one more question.

I'm thinking about buying the ANT + Bluetooth Health and Fitness Aggregator Kit to test the module.

Are there ANT-example codes coming with the kit, that have the initStack included?

Thank you.

0 Sundeep Javvaji over 11 years ago in reply to Nikolas Simon

TI__Mastermind 32615 points

Hi Simon,

I hope the below post answers your question

https://e2e.ti.com/support/low_power_rf/int-low_power_rf/f/300/p/308306/1073931.aspx

Bluetooth®︎

Bluetooth forum

Getting CC2567 to work