Qualification & reference QDID for BLE 1.4.0 stack

Doug Bartlett

I have discovered that while the 1.3.1 stack is qualified and has been given a QDID by the Bluetooth SIG, it appears that the 1.4.0 stack is not yet qualified.

When will 1.4.0 be qualified or if it is qualified, how do I reference it for a new EPL?

Doug

over 11 years ago

0 J Lindh over 11 years ago

TI__Guru 57865 points

Hi Doug,

BLEv1.4 is qualified. The QDIDs for our qualified subsystems apply to BLEv1.4 as well, please see our wiki for more information: http://processors.wiki.ti.com/index.php/How_to_Certify_your_Bluetooth_product.

Best Regards

Joakim

0 Doug Bartlett over 11 years ago in reply to J Lindh

Intellectual 265 points

Joakim,

Thank you for the quick reply. It would be helpful for others to add this bit of information to the Wiki or to the Bluetooth.org listing. The listing specifically references 1.3.x. I have not been able to find this anywhere in the existing documentation.

I am glad that I don't need to roll back to 1.4 in order to create my EPL.

Regards, Doug

0 Juha O over 11 years ago in reply to Doug Bartlett

Intellectual 610 points

I would also like to see correct version number in bluetooth.org listing. Now it is misleading.

Bluetooth®︎

Bluetooth forum

Qualification & reference QDID for BLE 1.4.0 stack