CC256x Bluetooth® Reference Design - Altium Files

Paul DeMarco

Other Parts Discussed in Thread: CC256XEM-RD

Hi,

I am trying to implement the reference design files found here http://www.ti.com/tool/cc256xem-rd

They seem to be for Allegro, which I do not have.

Is it possible to get an Altium conversion of this?

Best,

Paul

0 Sundeep Javvaji over 9 years ago

Hi,

I will check and get back to you on this.

0 Paul DeMarco over 9 years ago in reply to Sundeep Javvaji

Great, I look forward to your response.

0 Paul DeMarco over 9 years ago in reply to Paul DeMarco

Sundeep,

What's the status on this?

P.S. Altium files would be ideal, but if not, anyone with Cadence Allegro can convert the .BRD files to .ALG so that it can be imported into Altium.

0 Sundeep Javvaji over 9 years ago in reply to Paul DeMarco

Hi,

Sorry for the delay,

Yes you are correct anyone with Cadence Allegro can convert the .BRD files to .ALG so that it can be imported into Altium.

But I was trying to find some one who can do this for m

0 Sundeep Javvaji over 9 years ago in reply to Sundeep Javvaji

Hi,

Please see below, the inputs I have received internally

At this moment we cannot support the Allegro-to-Altium conversion. You can use the gerber files as a reference to create the design.

Since you want ALG format, you can use Altium to import it. If you don’t have Cadence.

If you have Cadence Allegro, you should be able to convert it. Perhaps a few tweaks here and there may be needed

Bluetooth forum