OAD question

ben wei

Other Parts Discussed in Thread: CC2541

Dear Ti,

May I ask, I am design in the customization cc2541
for OAD function, I want to burn B to B OK?

Because the app want to burn B to B, will be speaking with the wrong type. And can not burn.

I have tried the app to unlock this out, but found burning in B when B does not burn success.

What sort of problem?

Thanks

Ben

over 12 years ago

0 J Lindh over 12 years ago

TI__Guru 57865 points

Hey Ben,

I am not sure what you mean, maybe the OAD guide can give you some indication of what you are doing wrong.

Best regards

Joakim

0 Aslak N. over 12 years ago

TI__Mastermind 23440 points

Hi Ben,

When running Image B, you cannot write to Image B.

If you try to do this the chance for a crash is most likely 100% since the new image will not have stuff in the same place as the old one, so the composite image (the one writing to itself) will be invalid and out of sync with itself.

BR,
Aslak

0 ben wei over 12 years ago in reply to J Lindh

Intellectual 940 points

Dear Joakim

I mean How do I burn version(1.0) Type B update to New firmware version(1.5) Type B?

That's Ti APP show info as below,such as can't programming.

But,I already unlock APP can use Type A burn Type A will find,sensortag version same as before version.

Do you have any idea?

Thanks

Ben

0 ben wei over 12 years ago in reply to Aslak N.

Intellectual 940 points

Dear Aslak

Thanks your reply.

Thanks

Ben

Bluetooth®︎

Bluetooth forum

OAD question