simpleBLEperipheral, debugging on BlueGiga112A

Ballenahalli Lokesh

Intellectual 270 points

Other Parts Discussed in Thread: CC2540

I am working for implementing TI's SimpleBLEPheripheral on BlueGiga BLE 112A ,but I cant pair it with the dongle.

I would like to know how to establish connection.

over 12 years ago

0 Willis1 over 12 years ago

TI__Genius 17975 points

Are you using BlueGiga software or TI? The HAL code in the TI projects might not be properly configured for the BlueGiga HW.

0 Ballenahalli Lokesh over 12 years ago in reply to Willis1

Intellectual 270 points

Hello Willis,

I am using ti software,I am trying to flash simpleBLEperipheral to cc2540(bluegiga 112a).

Can you please tell me,what all changes I should do in HAL to configure bluegiga.

Regards,

Lokesh

0 Willis1 over 12 years ago in reply to Ballenahalli Lokesh

TI__Genius 17975 points

You will probably need contact BlueGiga for that information, as we are not experts on their HW. The simplest thing to try might be to disable the HAL drivers as much possible to keep things as simple as possible.

Bluetooth®︎

Bluetooth forum

simpleBLEperipheral, debugging on BlueGiga112A