how i can program cc2541 with smartrf flash programmer

Samuel Leal

Prodigy 40 points

Other Parts Discussed in Thread: CC2541

hi,

I am searching how to program cc2541 without cc debugger it is possible?

How can i do that with and without cc debugger?

If someone can help me on this i will apreciate.

Thanks!

over 11 years ago

0 Arun Menon over 11 years ago

TI__Expert 6505 points

Hi,

You can use either falsh programmer if you have a CC Debugger. Else if you have a smartRF05 EB board, you can use IAR to debug/flash program the CC2541 device.

Regadrs,

Arun

0 Samuel Leal over 11 years ago in reply to Arun Menon

Prodigy 40 points

hi,

Thanks Arun,

Don't have other ways to flash program the cc2541?

I have read something about Over-the-air(OTA) it's possible to program with this?

Thanks,

Samuel

0 svendbt over 11 years ago in reply to Samuel Leal

TI__Mastermind 29650 points

You first need to upload the OAD BLE project to it to enable this using a CC Debugger or the SmartRF05EB.

Regards;
Svend

0 Samuel Leal over 11 years ago in reply to svendbt

Prodigy 40 points

So i have must have cc debugger or smartrf05rb first withou this i can't flash program cc2541 is that?

Thanks,

Samuel Leal

0 svendbt over 11 years ago in reply to Samuel Leal

TI__Mastermind 29650 points

Correct.

Regards,
Svend

Bluetooth®︎

Bluetooth forum

how i can program cc2541 with smartrf flash programmer