ANCS alert notification on cc2541

Don David

Other Parts Discussed in Thread: CC2541, ASH, CC2540

Hi Everyone,

I am working on ANCS (alert notification profile) according to apple developer guidelines on cc2541. I was able to get the alerts working properly with the IOS7 , but with the latest relaesed IOS8 i am not able to get any notification working.

Can anybody tell me what changes i have to make so that it can be made to work with IOS 8.

Thanks

over 11 years ago

0 Willis1 over 11 years ago

TI__Genius 17975 points

You will probably need to check with Apple for information here.

0 Hsa S over 11 years ago

Expert 2570 points

Dear Don David.

I went through your post regarding implementation of ACNS for iOS.~ Thanks

I also want to implement ACNS feature for getting call or message alerts on CC2541 through iOS; What changes I have to make and where?

Please suggest the correct solution.

Thanks

/Ash

0 Don David over 11 years ago in reply to Hsa S

Intellectual 635 points

Hi Ash,

You need to follow as per the blog below

mbientlab.com/.../ancs-on-ti2541-in-an-afternoon

Thanks

0 Hsa S over 11 years ago in reply to Don David

Expert 2570 points

Dear Don David,Thanks for your reply~
I already reffered this but I cant observe the notification alert on dev board when comes to iphone. I am using "TI CC2540 rf05 board". Also after implementing the configuration as mentioend in the link, the board is paired once and then disconnect automatically.
Please let me know the required changes in addition to configuration which is mentioned in this mbientlab.com/.../ancs-on-ti2541-in-an-afternoon, and how can I observe the message notofication on dev board whne it comes to iphone.
Please help to resove this issue. Thanks a lot in advance.Regards/

Bluetooth®︎

Bluetooth forum

ANCS alert notification on cc2541