BLE Central broadcast

amit singh6

Hello

I want to advertise for limited time in BLEcentralbroadcast project.

i used this GAP_SetParamValue(TGAP_LIM_ADV_TIMEOUT, 2) but this routine in this project not worked but when i use this routine in simple pheripharal project then it work.

So tell what can i applied for limited time in blecentralbroastcast

thanks in andvance

over 10 years ago

0 Tim C over 10 years ago

TI__Mastermind 34660 points

Hello. You can do this by modifying the GAPROLE_ADVERT_OFF_TIME of the GAPRole. This is configured in the simpleBLEBroadcast project in SimpleBLEBroadcaster_Init() as such:

uint16 gapRole_AdvertOffTime = 10;
GAPRole_SetParameter( GAPROLE_ADVERT_OFF_TIME, sizeof( uint16 ), &gapRole_AdvertOffTime );

Note that this must be done before advertising is started.

0 amit singh6 over 10 years ago in reply to Tim C

Intellectual 450 points

Hello

How I get 6 byte address of peer device .

There is any API from which i access it in my application

Amit

Bluetooth®︎

Bluetooth forum

BLE Central broadcast