how to increase the delay before advertising

HONG GAO2

Other Parts Discussed in Thread: CC2541

Hi, TI

I am using CC2541. I found the advertising was delayed by 120ms.

Just as stated in the following URL:

http://e2e.ti.com/support/wireless_connectivity/f/538/t/255647.aspx

But just opposite to what was desired in the above URL,

I want to increase the delay so that the advertising will not be started during the entire 500ms intialization time.

Is there any way to increase the delay before advertising.

Thanks in advance!

Best regards

0 Dhaval V over 10 years ago

Genius 4470 points

If I understood your question correctly, you can start advertisement after the initialization.

0 HONG GAO2 over 10 years ago in reply to Dhaval V

How to start advertising after intialization?

I am using the sample CC2541DB.

But I didn't find how to start adverting after intialization.

I will be very appreciated if you couldtell me how to revise the code to start advertising after initialization.

0 Kimi Hu over 10 years ago

Hi GONG GAO2,

can you tell me which EVM and stack version do you use?

Bluetooth forum