Using CC2541 or CC2540 in Network processor mode (using HostTestApp) as a device

Val 83

Other Parts Discussed in Thread: CC2541

Hi,

I want to use BLE CC2541 chip driven by an external controler in Network processor mode, using HostTestApp firmware.

To start with something rather simple, I wanted to make a device working like the Keyfob. I tried but unsuccessfully, I am rejected by an Iphone or a Android device during the service discovery step.

Does someone has a code for am embedded processor using the HostTestApp in device mode ? A code for any kind of processor could be a great help for me (MSP, PIC, Arduino...).

Best regards,

Valentin

over 11 years ago

0 YiKai Chen over 11 years ago

Guru 735695 points

This forum is for ZigBee®, 6LoWPAN & 802.15.4 MAC not BLE. I would suggest you post your question in Bluetooth® Low Energy Forum.

0 YiKai Chen over 11 years ago

Guru 735695 points

By the way, HostTestApp is for center role not device. If you can describe your application more specific, I could try to provide suggestion.

0 Val 83 over 11 years ago in reply to YiKai Chen

Intellectual 470 points

We would like to use the HostTestApp for device role, in order to use a unique HostTestApp code for different products having different profiles. It seems to be possible, we have been successful for connecting the device to a central node, but we can't discover services..

Bluetooth®︎

Bluetooth forum

Using CC2541 or CC2540 in Network processor mode (using HostTestApp) as a device