Bluetooth emissions per ETSI EN 300 328

Thank you for your quick answer.

This document says that in case of adaptive equipment, the supplier shall declare if more than one adaptive mode is implemented and whether the equipment can also operate in a non-adaptive mode.

In clause 5.3.1 of this document shows the information that it shall be stated by the supplier. For adaptative and non-adaptative the information that I should know is:

c) whether or not the system is a non-adaptive system, an adaptive system or a system that can operate in both
an adaptive and non-adaptive mode;

d) for adaptive equipment: whether LBT based DAA or non-LBT based DAA (any other form of DAA) is used
(see clauses 4.3.1.6 and 4.3.2.5) and the maximum Channel Occupancy Time implemented by the equipment.
In case of LBT based adaptive equipment, the CCA time implemented by the equipment. For Load Based
Equipment refered to in clause 4.3.2.5.2.2.2, the value 'q' refered to in point 2 of this clause;

e) for non-adaptive equipment, the maximum duty cycle used by the equipment. For equipment with a dynamic
behaviour with regard to RF Output Power and Duty Cycle, such behaviour shall be described.

I have no idea of the kind of modes. cc256x can work in more than one adaptive mode? cc256x can also operate in non-adaptative mode?

Thank you so much.

Regards,

Ruben

Hi,

How can I know what is my Service pack? my firmware uses bluetopia bluetooth stack.

This device passed FCC certification (I had a special firmware with all BT Test Cases), and now, my client want to get CE certification.

He want to know if the device is an adaptive or non-adaptive device because the testing parameters are different for adaptive and non-adaptive devices. 

Thank you so much.

Ruben

Hi,

I use Bluetooth Protocol Stack from stonestreet one (bluetopia) and it is the version 4.0

I have read the release notes of bluetopia core and it says that this release contains the Service Pack 2.5 base patch and LE patch.

Thanks,

Ruben

Hi Gigi,

Two questions, if with the current service pack it passed the FCC test, why not is it  going to get the CE certificate?

The release notes of bluetopia says that it contains the Service Pack 2.5, is this wrong?

Thank you.

Ruben

Hello,
My client needs to know the following points:
For an adaptive device, What is the Dwell time, Minimum Frequency Occupation and Hopping Sequence?  

Thank you so much.
Ruben