scan response data

zahiz zloterz

Intellectual 330 points

Other Parts Discussed in Thread: CC2564

Hi,

I am using ARM TM4C123 with BLE CC2564 chip

Bluetopia stack

I want to use only Advertising and scan response data for sending data

is there a way for me to know that the Central asked for the scan response data

thanks

Zahi

over 11 years ago

0 Sundeep Javvaji over 11 years ago

TI__Mastermind 32615 points

Hi,

Scan response data will be part of the SCAN_RSP PDU and will be sent by the advertiser and the device in Scanning State (SCAN_REQ) can receive it.

0 zahiz zloterz over 11 years ago

Intellectual 330 points

Hi
Thanks
my question is can I get indication from the stack that the Central asked for it
my intention is to detect that a Central got my advertising data

thanks
Zahi

0 Sundeep Javvaji over 11 years ago in reply to zahiz zloterz

TI__Mastermind 32615 points

Hi,

I don't think it is possible. I think this a generic question, Please also see the BT specification.

Bluetooth®︎

Bluetooth forum

scan response data