• State
  • Locked Locked
  • Replies 3 replies
  • Subscribers 52 subscribers
  • Views 386 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Regarding CC2541 BLE_SPI_test

Gokul Venkatesan
Prodigy 70 points
Other Parts Discussed in Thread: CC2541, CC2540

Hi,

        We found the document  BLE-SPI-Driver-Design-External.pdf in TI's e2e forum. Inside the document , they given some code link sancsvn01.sanc.design.ti.com/.../branchesBLE_SPI_test . when we tried to open , it fails. So we want the working link of the code , that will be useful for our development.

 

Regards,

Gokul Venkatesan

  • 0
    TI__Guru** 106705 points
    Hi Gokul,

    Which document are you referring to and where did you find it?

    BR,
    Fredrik
  • 0 in reply to Fredrik K
    Prodigy 70 points
    Hi Fredrik,
    The document which is referred was " BLE 1.4 SPI Driver Design - Version 1.x(Draft) " from TI. In that document there is a link " sancsvn01.sanc.design.ti.com/.../branches" where i can find the code. But it is not the working link, so i couldn't find the sample code for that. I am in need for the sample code.

    Regards,
    Gokul Venkatesan
  • 0 in reply to Gokul Venkatesan
    TI__Guru 57865 points

    Hey Gokul,

    That document is an internal R&D specification and the path is pointing to the internal SVN, which only R&D has access to. For reference code, please have a look at;

    • SPI build for HostTestRelease (part of the BLE stack installer)
    • SPI driver for Keyfobdemo projects (note that CC2540 and CC2541 builds uses different sensors)
    • SPI example on wiki:

     

    Best Regards

    Joakim