CC2640 proprietary

M.H

Genius 5960 points

Other Parts Discussed in Thread: CC2640

Hi,

CC2640 has recognized as products for BLE.

CC2640 Do you can operate in "proprietary"?

Best Regards,

hamada

over 10 years ago

0 JXS over 10 years ago

TI__Guru** 105180 points

Hi Hamada,

The CC2640 PHY is capable of operating in a proprietary mode, but there is currently no SW available for this configuration. Currently, only BLE is supported with the BLE Stack v2.0 SDK.

Best wishes

0 M.H over 10 years ago in reply to JXS

Genius 5960 points

Hi, JXS.

Thank you for reply.

I am understand.

Do you have any plans to adapt to proprietary in CC26xx series?

Best Regards,

hamada

0 M.H over 10 years ago in reply to M.H

Genius 5960 points

Hi,

Can you comment?

Best Regards,

hamada

0 Tim C over 10 years ago in reply to M.H

TI__Mastermind 34660 points

No, there is no current plan for this.

0 Tim C over 10 years ago in reply to Tim C

TI__Mastermind 34660 points

Please do note that proprietary is supported in hardware. See the following thread:
e2e.ti.com/.../410099

Bluetooth®︎

Bluetooth forum

CC2640 proprietary