cc2640 i2s application

user4108849

Prodigy 70 points

Other Parts Discussed in Thread: CC2640

Hello,is there any demo about i2s application with cc2640?

I just can't work correctlly with the i2s driver in CC26XXWARE .

why there is no i2s interface in C:\ti\tirtos_simplelink_2_11_01_09\packages\ti\drivers like the i2c ,spi.

thanks for your help!

over 11 years ago

0 YiKai Chen over 11 years ago

Guru 735695 points

You can refer to CC2640 SensorTag which gives you I2C example.

0 user4108849 over 11 years ago in reply to YiKai Chen

Prodigy 70 points

thanks for your suggestion,I have refered to I2C but it's so different between them.
I think there will be I2S demo project,but TI developer is a little slowly.

0 YiKai Chen over 11 years ago in reply to user4108849

Guru 735695 points

I don't think TI would provide a dedicate I2C example. I suggest you to study SensorTag first.

0 svendbt over 11 years ago

TI__Mastermind 29650 points

Hi,

We have not had time to write a TI RTOS I2S driver yet unfortunately. The CC26XXWARE low-level drivers will not work in TI RTOS without a power management, interrupt and IO handling framework around them.

Regards,
Svend

0 Vladimir Cundekovic over 10 years ago in reply to svendbt

Intellectual 400 points

Hello!
Is there any news about I2S driver?
Is there plan that TI implements it? Any rough estimation?

Vladimir

0 Ed Hepler over 10 years ago in reply to Vladimir Cundekovic

Expert 1940 points

I'm also interested in using the I2S. When will a driver be available? Is there a demo/example that uses I2S?
Thanks...

Bluetooth®︎

Bluetooth forum

cc2640 i2s application