• State
  • Locked Locked
  • Replies 3 replies
  • Subscribers 51 subscribers
  • Views 463 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SESUB-PAN-T2541 - I DON'T MATCH A BLUETOOTH DONGLE

Ricardo Faria23
Prodigy 60 points
Other Parts Discussed in Thread: CC2540

I need to communicate SESUB -PAN - T241 with the windows and I did not succeed .

Anyone , suggest any usb dongle for this ?

  • 0
    TI__Guru** 105180 points
    Hi Ricardo,

    Can you give us some details on what you tried and what error(s) you encountered?
    Have you tried using the CC2540USB dongle?

    Best wishes
  • 0 in reply to JXS
    Prodigy 60 points

    I buy a usb bluetooth 4.0 dongle and i dont connect with windows 8, only with iphone 5.

    I need connect with windows, because i will test with this. And i need connect with any bluetooth host, not only CC2540.

  • 0 in reply to Ricardo Faria23
    TI__Guru** 105180 points
    Hi Ricardo,

    I apologize, but I'm still not clear on your setup details. What dongle are you using on your Win 8 system? What SW stack are you running to control the dongle on Win8? What is your peripheral device?

    For example, the TI CC2540USB dongle can be connected to a Win8 machine. You can then use BTool, which implements the TI Vendor Specific HCI protocol to control the dongle via the exposed USB CDC Serial Port. You can then establish a connection to any BLE compliant peripheral from BTool. Perhaps you can explain your setup in this level of detail.

    Best wishes