Looking for expert consultant for CC2541 BLE design review

Marty Holmquist

Other Parts Discussed in Thread: CC2541

Hello,

My company is looking for a guru of the CC2541, OSAL, and BLE 1.4 stack. We want to work with this expert to review our code designs and catch issue prior to product launch. Hoping this forum is a good place to reach out, if not I would welcome other suggestions!

Marty

over 10 years ago

0 Mark Iverson over 10 years ago

Prodigy 180 points

Hi Marty,
I've worked with the 2541 and 1.4 stack for the last 12 months. The system involves various sensors, is monitoring proximity, and is composed of two 'peripherals' and one 'central', bonded and passing data every 50msecs. I wouldn't say I'm an expert with BLE, but have 30+ years of embedded s/w exp. Happy to discuss via phone call first. -mark

0 Marty Holmquist over 10 years ago in reply to Mark Iverson

Prodigy 240 points

Hi Mark,

Thanks for the reply! Well you have 10 years on me, but I have the same experience and exposure to BLE. Do you happen to be in San Diego area?

Marty

0 Spero Koulouras1 over 10 years ago

Prodigy 20 points

Marty - I've been working with TI (and other) BLE components for about 3 years and have plenty of grey hair, also with 30+ years of dev experience. San Francisco Bay area.

0 JXS over 10 years ago in reply to Spero Koulouras1

TI__Guru** 105180 points

Hi Marty,

In addition to the suggestions above, you can find a list of 3rd party module makers on the TI BLE Wiki page page: processors.wiki.ti.com/.../CC254X_Module_Partners

Many of these partners offer design & consultation services.

Best wishes

0 Derek over 10 years ago in reply to Mark Iverson

Mastermind 9792 points

Hello, we're in San Diego and have BLE experience on multiple platforms, including CC2541. Message me and we can talk more.

0 Mark Iverson over 10 years ago in reply to Marty Holmquist

Prodigy 180 points

I'm in Reno, but email works just fine for a simple review... I'll contact you offline.

Bluetooth®︎

Bluetooth forum

Looking for expert consultant for CC2541 BLE design review