"Custom Bluetooth Smart Embedded Application" guide using CCS iso IAR

You can try to refer to SWRU393_CC2640_BLE_Software_Developer's_Guide.pdf in C:\ti\simplelink\ble_cc26xx_2_00_00_42893\Documents after you install BLE-STACK-2.

Hi,
I would prefer that the additional training program is for CCS PC (HD on my Computer) too and not for CCS Cloud only.
Bernhard

Idem

It will a downloadable bundle that can be used for both CCS locally and in the cloud.

.:svend

Good to hear! When will it be ready?

Before that, maybe you could advice how to set the CCS project so that    "SunligtSensor"     becomes visuable in the   Import CCS Eclipse Projects    window.

Bernhard

Hi All ,

what is the process to create our own simplelink-ble application using code composer studio 6.1 , is there any document to explain the procedure. we want to create our own application using ccs6.1 . we using cc2650-stk board

Thanks in advance

Hello,
You can use the BLE SW Developer's Guide (SWRU393) as a reference.

Best wishes

Hello JXS ,

I followed that document , there is no procedure how to create a new project using code composer studio

There is no guide to make a project from scratch. They expect beginners to start by trying out sample projects an implement their own in the existing ones. I am also hurting my head from the last week but still can't add UART into sample project. Over all that i started using CSS learned a few trick about it and then there's a tutorial(on adding UART) using IAR. That's so frustrating. But still trying to figure it out.....

These might be trivial topic for TI BLE team but it is very fundamental question from newbies. I think TI should provide application note or documents for these.

That's the problem. I thought after watching TI-RTOS tutorials i would be able to easily understand whats going on inside Sensortag Application code.Still no where near easy. They could have provided a detailed document to explain all the modules.
The SenorTag being cheap is very attractive for beginners like me, but without documents(for beginners) I think I am just wasting my time.