Obtaining on-board sensor performance using CC2650STK

Patrick16

Other Parts Discussed in Thread: CC2650STK

Hi, I was wondering if I would like to use the CC2650STK as a sensor benchmark system for my research where I will collect the on-board sensor data for performance comparison with other similar sensors (from another manufacture). Is there any concern on doing that?

Thanks.

over 10 years ago

0 Fredrik K over 10 years ago

TI__Guru** 106705 points

Hi Patrick,

I cannot see any concerns with that.

Cheers,
Fredrik

0 Patrick16 over 10 years ago in reply to Fredrik K

Intellectual 270 points

Thank you.

Actually, my concern is more on the sensors in the CC2650STK board. I am not sure if the individual sensor manufactures have some terms not allowing doing the sensing performance comparison?

0 svendbt over 10 years ago in reply to Patrick16

TI__Mastermind 29650 points

I don't see any issues doing that. Most customers do in fact compare performance before selecting which components to use.
Make sure to follow the manufacturers guidelines for optimal performance :)

Best regards,
Svend

Bluetooth®︎

Bluetooth forum

Obtaining on-board sensor performance using CC2650STK